HOW TO CHOOSE A SIZE? 

Selecting a size is straight forward, it’s a universal size that fits most people, simply measure your heel to the top of your thigh, along with the full Diameter of your thigh.

Then reference a size below. The Diameter of your thigh should have approx. 3 finger or 2" gap to allow for the inflation to compress on the thigh. Remember that the boots will inflate, the size is a rough guide.

Size guide - L (Length), D (Diameter).

100cm L x 75cm D - 

(est.height fits = 5’6 to 6'6ft)

Power

Pressure Range: 80-260mmHg

Battery & Power: 5200mAh Li Rechargeable, 49W

Power Supply: 100-240V - 12.6VDC - 4A

PLEASE NOTE: All Compression Boots chargers come with a UK Plug, we offer EU & AU chargers; just purchase your countries charger type by adding to your basket by clicking here

Functions

Display & Modes: 4 Function Modes including positive & negative pressure via LED touch screen.

Rechargeable Version - Air Chambers: 6 Overlapping Chambers, individual zone selection.

Fixed Plug Version - Air Chambers: 6 Overlapping Chambers, individual zone selection.

Operating Conditions

Treatment Time: 10-90mins

Noise: ≤40DB(A)

Ambient Temperature: 10-40°C

Size

Carry Bag Dimensions: 37x36x23 cm

Weight: 4.7 kgs

A - Each chamber inflates individually then deflates, moving up the leg. Cycles then repeats.

B - Most Recommend- Inflating each chamber while holding the previous pressurised chamber, moving up the leg. Cycles then repeats.

C - Inflating 2 chambers at a time, then decompressing the first chamber inflated. In a leap frog cycle. Cycles then repeats.

D - All chambers inflate, then deflate. Cycles then repeats.

We offer shipping worldwide!

We have stock available in our fulfilment warehouses, located in the United Kingdom & Australia.

All shipping rates are calculated from your cart order at check out.

We guarantee quality workmanship.

For peace of mind, we offer a 1yr electronic parts warranty, including your 14 day money back refund.

Have an issue with your system?

Here are some useful tips to help you:

Chambers not inflating?

1. Check hose is not kinked, split and all ports are in their respected outlets.

2. Check that you have all chambers activated, via the LED touch screen on the chamber activation settings. And unit is fully charged.

3. Check the connection points between hoses, open and see if the rubber O rings are in tact, replace if issue persists.

4. Ensure you have more than the lowest pressure output on your controller, increase above 80 mmHg.

5. Check the white O rings inside of the controller, ensure all are there and not damaged. Replace if issue persists.

If issues persists, please contact us for help.